Acura 2004-2008 3rd Gen - RGB Flow Package

Transform your Acura's TL front end with these Custom Headlights.

WHATS INCLUDED

•    Super bright RGBW Flow LEDS 
•    Controlled by Next Level Neo Flow Series Controller
•    Over 200 show modes
•    Sequential turn signals 
•    Startup animation
•    All controlled via App “Magic-LED”
•    A single “Kill switch” remote for activating and deactivating color mode-Saves battery
•    Mostly Plug and play, No Rats nest of wires here.

INSTALL

•    Install is 95% plug and play. Each headlight will have a single Black barrel connector that plugs into the controller. (WILL BE 2 CONNECTORS PER HEADLIGHT IF DEMON EYES ARE OPTIONED)

•    The controller has two ring terminals for ground and power, each should be installed on battery power and ground respectively.

•    Controller will have: A two-barrel connector, one for each headlight (plugs into headlight receiving barrel connector), 1 white drl wire with a posi tap at the end (this will be screwed/tapped into a receiving posi tap already installed underneath the PASSENGER headlight) and finally 2 turn signal wires with a posi-tap at the end, one for each headlight.

•    To tap for turn signals, this is found on your headlight. There will be a receiving posi-tap labeled “turn signals” for you to screwin/tap the turn signal wires to.

ADD ONS

•    SIDE REFLECTORS: Choose whether to keep the orange reflector, or remove/clear(ONLY FOR TYPE S OR PRE-BUILT SETS)

•    HALOS: An Led ring that sits around the projector.

•    DEMON EYES: An Led mounted behind your projector that illuminates the projector lens with any desired color. THIS DOES NOT REPLACE YOUR LOWBEAM. When low beam and demon eyes are on, your low beam will ALWAYS out shine the demon eyes. If opted for DEMON EYES, Build will come with a controller that connects directly to your battery (positive and negative terminal). This controller plugs into the rear of your headlight to a receiving end. DEMON EYES are controlled via app called "BanlanX"

•    LENS ECTHING: A desired design placed on the projector lens, that does not affect light output. If opted for etched lens design, the DEMON EYES add on pairs exceptionally well with them; as they back light your design on the lens.

SHIPPING YOUR HEADLIGHTS

•   Customers are responsible for shipping their headlights
•    We are not responsible for any damages customers headlights may receive upon shipping
•    For Best rates when shipping headlights use: Free UPS and USPS shipping software | Pirate Ship
•    Ship headlights to this address with order number included:

RetrofitSamurai
847 South Randall Road,
PMB 409,
ELGIN IL, 60123

IMPORTANT INFORMATION
•    All retrofits builds 6 – 8 Week Build Time (Subject to change)
•    For questions on any builds contact me via Instagram

WARRANTY
•    3 Month Warranty
•    1 Year warranty on: DEMON EYES, RGB HALOS, RGB HEADLIGHT CONTROLLER
•    Customers are in charge of shipping product to be reworked on
•    Return shipping is covered by us